BJXSM - POLYURETHANE RESIN COMPONENTS
- MSDS: BJXSM
- Manufacturer: INSTA FOAM PRODUCTS INC
- Product Name: POLYURETHANE RESIN COMPONENTS
- National Stock Number: 8030-01-146-0980
Product Identification
Product ID:POLYURETHANE RESIN COMPONENTS
MSDS Date:05/01/1985
FSC:8030
NIIN:01-146-0980
Kit Part:Y
MSDS Number: BJXSM
Responsible Party
JOLIET, IL 60435
US
Emergency Phone: 800-435-9359/815-741-6800
Info Phone: 815-741-6800
Preparer: GREG LUEGERING
Cage: 54577
Contractor
Telephone: 815-741-6800
Cage: 54577
Ingredients
POLYURETHANE POLYOLS
Fraction By Weight: < 85%
SURFACTANTS
Fraction By Weight: < 5%
ORGANIC PHOSPHORUS/HALOGEN COMPOUNDS
Fraction By Weight: < 35%
POLYURETHANE CATALYSTS
Fraction By Weight: < 10%
EMULSIFIERS
Fraction By Weight: < 10%
CHLOROFLUOROALKANE
Fraction By Weight: <40%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:VAPORS CAUSE DIZZINESS DUE TO
INSUFFICIENT OXYGEN AND BE MAY IRRITANT TO RESPIRATORY TRACT,
POSSIBLE CARDIAC ARRHYTHMIAS AT HIGH CONCENTRATIONS FOR
CHLOROFLUOROALKANE. THRESHOLD LIMIT VALUE: (5600 MG/ M3) 1000 PPM
FOR CHLOROFLUOROALKANE.
First Aid
First Aid:SEEK MEDICAL ASSISTANCE FOR TREATMENT, OBSERVATION AND
SUPPORT AS NEEDED. INGESTION: DRINK WATER TO DILUTE. INHALATION:
MOVE TO FRESH AIR AND ADMINISTER OXYGEN IF NECESSARY. FLUSH WITH
WATER FOR 15 MI NUTES. SKIN: WASH WITH SOAP AND WATER FOR 5
MINUTES.
Fire Fighting
Flash Point:N.E.
Extinguishing Media:USE WATER, CARBON DIOXIDE, OR DRY CHEMICAL.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS WHEN THIS
MATERIAL IS IN A FIRE TO PROTECT FROM DECOMPOSITION AND COMBUSTION
PRODUCTS.
Unusual Fire/Explosion Hazard:CONTAINS CHLOROFLUOROALKANE AND N2 WHICH
CAN DEVELOP PRESSURE IN SEALED CONTAINERS. VAPORS FORM WHEN A&B
MIX, THEY ARE HEAVIER THAN AIR & MAY SETTLE LOW AREAS.
Accidental Release
Spill Release Procedures:PROVIDE VENTILATION; ISOLATE AREA. LARGE
SPILLS: ABSORB WITH INERT MEDIUM (VERMICULITE) AND PLACE IN COVERED
CONTAINER. SCRAP MATERIAL MAY BE MIXED WITH COMPONENT B TO PRODUCE
AN INERT SOLID.
Handling
Handling and Storage Precautions:STORAGE MINIMUM 60F(16C), MAXIMUM
120F(49C). PROTECT FROM FREEZING AND OVERHEATING. WHEN USING
MATERIAL READ INSTRUCTIONS.
Other Precautions:EDUCATE AND TRAIN EMPLOYEES IN SAFE USE OF PRODUCT.
Exposure Controls
Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS FOR EMERGENCY
USE. USE RESPIRATOR TO MAINTAIN AIR CONCENTRATION BELOW TLV.
Ventilation:LOCAL EXHAUST REQUIRED TO MAINTAIN AIR CONCENTRATION BELOW
TLV.
Protective Gloves:NEOPRENE, BUTYL RUBBER, PVC,POLYETHYLENE
Eye Protection:VAPORS: SAFETY SHIELD, GOGGLES, GLASSES.
Other Protective Equipment:SAFETY SHOWER AND EYEWASH SHOULD BE
AVAILABLE.
Supplemental Safety and Health
THE FOAM REACTION PRODUCTS, WHEN A & B COMPONENTS INTERACT, INCLUDE
HEAT, CHLOROFLUOROALKANE AND SOME MDI VAPORS. THESE ARE HEAVIER
THAN AIR AND MAY SETTLE IN LOW AREAS.
Chemical Properties
Vapor Density:> THAN 1
Spec Gravity:>1
Evaporation Rate & Reference:> 1.0 (BUTYL ACETATE)
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR LIQUID
Percent Volatiles by Volume:<40*
Corrosion Rate:*(BY WT)
Stability
Stability Indicator/Materials to Avoid:YES
AVOID ALKALI & ALKALINE EARTH METALS SUCH AS SODIUM WITH
CHLOROFLUOROALKANE.
Stability Condition to Avoid:DO NOT INCINERATE AND AVOID OPEN FLAMES.
DO NOT STORE ABOVE 120F(49C).
Hazardous Decomposition Products:TOXIC & CORROS FUMES: HALOGENS,
CARBONYL HALIDES CAN RESULT FROM HIGH TEMPERATURES DECOMPOSITION OF
CHLOROFLUOROALKANE.
Disposal
Waste Disposal Methods:DISPOSE OF MATERIAL ACCORDING TO FEDERAL, STATE
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.